Butler-Volmer equation

Butler-Volmer equation

The Butler-Volmer equation is one of the most fundamental relationships in electrochemistry. It describes how the electrical current on an electrode depends on the electrode potential, considering that both a cathodic and an anodic reaction occur on the same electrode:

: I = A cdot i_0 cdot left{ exp left [ frac { (1 - alpha) cdot n cdot F } { R cdot T } cdot ( E - E_{eq} ) ight] - exp left [ - { frac { alpha cdot n cdot F } { R cdot T } } cdot ( E - E_{eq} ) ight] ight}

where::I: electrode current, A:i_o: exchange current density, A/m2:E: electrode potential, V:E_{eq}: equilibrium potential, V:A: electrode active surface area, m2:T: absolute temperature, K:n: number of electrons involved in the electrode reaction:F: Faraday constant:R: universal gas constant:alpha: so-called symmetry factor, dimensionless

The equation is named after chemists John Alfred Valentine Butler and Max Volmer.

Limitations

The equation is valid when the electrode reaction is controlled by electrical charge transfer at the electrode (and not by the mass transfer to or from the electrode surface from or to the bulk electrolyte). Nevertheless, the utility of the Butler-Volmer equation in electrochemistry is wide, and it is often considered to be "central in the phenomenological electrode kinetics". [J. O'M. Bockris, A.K.N.Reddy, and M. Gamboa-Aldeco, "Modern Electrochemistry 2A. Fundamentals of Electrodics.", Second Edition, Kluwer Academic/Plenum Publishers, p.1083, 2000.]

The limiting cases

There are two limiting cases of the Butler-Volmer equations:
* the low overpotential region (called "polarization resistance"), where the Butler-Volmer equation simplifies to:: i=i_0 frac {nF} {RT} (E-E_{eq})
* the high overpotential region, where the Butler-Volmer equation simplifies to the Tafel equation::E-E_{eq} = a - b log(i) for a cathodic reaction, or::E-E_{eq} = a + b log(i) for an anodic reaction,

where a and b are constants (for a given reaction and temperature) and are called the Tafel equation constants.

See also

* Nernst equation
* Tafel equation

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Max Volmer — Born May 3, 1885 Hilden …   Wikipedia

  • Tafel equation — The Tafel equation relates the rate of an electrochemical reaction to the overpotential. [Bard, A. J.; Faulkner, L. R. “Electrochemical Methods. Fundamentals and Applications” 2nd Ed. Wiley, New York. 2001. ISBN 0 471 04372 9] The Tafel equation… …   Wikipedia

  • electrochemical reaction — ▪ chemistry Introduction       any process either caused or accompanied by the passage of an electric current and involving in most cases the transfer of electrons between two substances one a solid and the other a liquid.       Under ordinary… …   Universalium

  • Cyclic voltammetry — Typical cyclic voltammogram where ipc and ipa show the peak cathodic and anodic current respectively for a reversible reaction. Cyclic voltammetry or CV is a type of potentiodynamic electrochemical measurement. In a cyclic voltammetry experiment… …   Wikipedia

  • Dielectric spectroscopy — A dielectric permittivity spectrum over a wide range of frequencies. The real and imaginary parts of permittivity are shown, and various processes are depicted: ionic and dipolar relaxation, and atomic and electronic resonances at higher energies …   Wikipedia

  • Coulometry — is the name given to a group of techniques in analytical chemistry that determine the amount of matter transformed during an electrolysis reaction by measuring the amount of electricity (in coulombs) consumed or produced.[1] There are two basic… …   Wikipedia

  • Voltammetry — is a category of electroanalytical methods used in analytical chemistry and various industrial processes. In voltammetry, information about an analyte is obtained by measuring the current as the potential is varied. Three electrode system… …   Wikipedia

  • Potentiometer (measuring instrument) — A potentiometer is an instrument for measuring the potential (voltage) in a circuit. Before the introduction of the moving coil and digital volt meters, potentiometers were used in measuring voltage, hence the meter part of their name. The method …   Wikipedia

  • Differential pulse voltammetry — (AKA Differential Pulse Polarography or DPP) is often used to make electrochemical measurements. It can be considered as a derivative of linear sweep voltammetry or staircase voltammetry, with a series of regular voltage pulses superimposed on… …   Wikipedia

  • Solid oxide fuel cell — A solid oxide fuel cell (SOFC) is an electrochemical conversion device that produces electricity directly from oxidizing a fuel. Fuel cells are characterized by their electrolyte material and, as the name implies, the SOFC has a solid oxide, or… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”