Product design specification

Product design specification

A product design specification (PDS) is a statement of what a not-yet-designed product is intended to do. Its aim is to ensure that the subsequent design and development of a product meets the needs of the user.The Open University (UK), 2001. T881 Manufacture Materials Design: Block 1: The design activity model, page 10. Milton Keynes: The Open University.]

The PDS acts as an initial boundary in the development of products. However, it will naturally evolve as it is progressed through the different stages of the design process.The Open University (UK), 2001. T881 Manufacture Materials Design: Block 1: The design activity model, page 9. Milton Keynes: The Open University.]

Information included in a PDS

A PDS is not limited to the function the product is designed to perform. It will consider issues as diverse asThe Open University (UK), 2001. T881 Manufacture Materials Design: Block 1: The design activity model, page 12 and 13. Milton Keynes: The Open University.]

* Performance (e.g. speed, power)
* Weight and size
* Operating environment (during storage, transport, installation and use)
* Target cost
* Appearance
* Ergonomic issues
* Life expectancy of the product
* End-of-life disposal
* Safety issues
* Standards or industry codes of practice
* Existing patents in the specific area.
* Quantity of production
* Maintenance that may be available to the product.
* Intended time of market release

The relative importance of the factors considered in a PDS depends on the specific area of design and the particular application.

PDS vs. product specification

The PDS is a specification of what is required but not the specification of the product itself. Describing the actual product is done in the technical specification, once the product has been designed. The difference is important since describing the product itself at the stage of creating a PDS, effectively constraints the range of alternatives that are considered during the design process.

The distinction can be seen as the difference between "What is the product to do?" and "How will the product do it?"

PDS vs. design brief

The PDS evolves from the design brief. While the design brief outlines the design goal and major constraints and considerations, the PDS goes further to determine the precise limits for the full set of requirements in the product being designed.CROSS, N., 2006. T211 Design and Designing: Block 2, page 99. Milton Keynes: The Open University.]

ee also

* Design brief
* Design specification
* Specification
* Specification (technical standard)

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Design specification — A design specification provides explicit information about the requirements for a product and how the product is to be put together. It is the most traditional kind of specification, having been used historically in public contracting for… …   Wikipedia

  • Specification (technical standard) — Specification redirects here. For other uses, see Specification (disambiguation). A specification (often abbreviated as spec) is an explicit set of requirements to be satisfied by a material, product, or service.[1] Should a material, product or… …   Wikipedia

  • Manufacturing test requirement design specification — (MTRD) is a document which specifies how the test is going to be implemented on a new/upcoming product. It specifies what test will be ready during different build processes, the percentage of coverage for each stages of those build process, and… …   Wikipedia

  • Design — For the 1970s music group, see Design (UK band). All Saints Chapel in the Cathedral Basilica of St. Louis by Louis Comfort Tiffany. The building structure and decorations are both examples of design …   Wikipedia

  • Design brief — A design brief is a comprehensive written document for a design project developed in concert by a person representing the business need for design and the designer. The document is focused on the desired results of design – not aesthetics. Design …   Wikipedia

  • Product lifecycle management — (PLM) is the process of managing the entire lifecycle of a product from its conception, through design and manufacture, to service and disposal. [cite web title = About PLM publisher = CIMdata url = http://www.cimdata.com/PLM/aboutPLM.html ] PLM… …   Wikipedia

  • Product Family Engineering — Product families/lines are quite common in our daily lives, but before a product family can be successfully established, an extensive process has to be followed. This process is known as product family engineering, product line engineering, and… …   Wikipedia

  • Design comics — are a type of storyboarding used in product and web site design. Design comics include product consumers or other characters in an illustrated story that shows how the users interact with the product. This method of storytelling is closely… …   Wikipedia

  • Design and Technology — (DT) is a school subject offered at all levels of primary and secondary school. In some countries such as England it is a part of the National Curriculum. It is offered in many countries around the world such as Brunei, Bermuda, Singapore,… …   Wikipedia

  • Design for testing — Design for Test (aka Design for Testability or DFT ) is a name for design techniques that add certain testability features to a microelectronic hardware product design. The premise of the added features is that they make it easier to develop and… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”