Alloy-junction transistor

Alloy-junction transistor

The germanium alloy-junction transistor, or alloy transistor, was an early type of bipolar junction transistor, developed at General Electric and RCA in 1951 as an improvement over the earlier grown-junction transistor.

The usual construction of an alloy-junction transistor is a germanium crystal forming the base, with emitter and collector alloy beads fused on opposite sides. There were several types of improved alloy-junction transistors developed over the years that they were manufactured.

All types of alloy-junction transistors became obsolete in the early 1960s, with the introduction of the planar transistor which could be mass produced easily while alloy-junction transistors had to be made individually. The first germanium planar transistors had much worse characteristics than alloy-junction germanium transistors of the period, but as they could be mass produced and alloy-junction transistors could not, they cost much less and the characteristics of planar transistors improved very rapidly, quickly exceeding those of all earlier Germanium transistors.

Contents

Micro-alloy transistor

The micro-alloy transistor (MAT) was developed by Philco as an improved type of alloy-junction transistor, it offered much higher speed.

It is constructed of a semiconductor crystal forming the base, into which a pair of wells are etched (similar to Philco's earlier surface-barrier transistor) on opposite sides then fusing emitter and collector alloy beads into the wells.

Micro-alloy diffused transistor

The micro-alloy diffused transistor (MADT), or micro-alloy diffused-base transistor, was developed by Philco (but GE and RCA filed for patent and Jacques Pankove of RCA received patent for it) as an improved type of micro-alloy transistor; it offered even higher speed. It is a type of diffused-base transistor.

Before etching wells into the base crystal, a diffused base layer is created over the entire base crystal. The emitter well is etched very shallow into this diffused base layer.

For high-speed operation, the collector well is etched all the way through the intrinsic base semiconductor to the diffused base layer. A doping-engineered electric field was created in the diffused base layer to reduce the charge carrier base transit time (similar to the drift-field transistor).

For high-voltage operation, the collector well is not etched all the way to the diffused base layer, leaving some intrinsic base semiconductor.

Post-alloy diffused transistor

The post-alloy diffused transistor (PADT), or post-alloy diffused-base transistor, was developed by Philips (but GE and RCA filed for patent and Jacques Pankove of RCA received patent for it) as an improvement to the germanium alloy-junction transistor, it offered even higher speed. It is a type of diffused-base transistor.

The Philco micro-alloy diffused transistor had a mechanical weakness that ultimately limited their speed; the thin diffused base layer would break if made too thin, but to get high speed it needed to be as thin as possible. Also it was very hard to control alloying on both sides of such a thin layer.

The post-alloy diffused transistor solved this problem by making the bulk semiconductor crystal the collector (instead of the base), which could be as thick as necessary for mechanical strength. The diffused base layer was created on top of this. Then two alloy beads, one P-type and one N-type were fused on top of the diffused base layer. The bead having the same type as the base dopant then became part of the base and the bead having the opposite type from the base dopant became the emitter.

A doping-engineered electric field was created in the diffused base layer to reduce the charge carrier base transit time (similar to the drift-field transistor).

See also

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Bipolar junction transistor — BJT redirects here. For the Japanese language proficiency test, see Business Japanese Proficiency Test. PNP …   Wikipedia

  • Transistor — For other uses, see Transistor (disambiguation). Assorted discrete transistors. Packages in order from top to bottom: TO 3, TO 126, TO 92, SOT 23 A transistor is a semiconductor device used to amplify and switch electronic signals and power. It… …   Wikipedia

  • Tetrode transistor — A tetrode transistor is any transistor having four active terminals.Early tetrode transistorsThere were two types of tetrode transistor developed in the early 1950s as an improvement over the point contact transistor and the later grown junction… …   Wikipedia

  • Avalanche transistor — An Avalanche Transistor is a bipolar junction transistor designed for operation in the region of its collector current/collector to emitter voltage characteristics beyond the collector to emitter breakdown voltage, called avalanche breakdown… …   Wikipedia

  • p-n junction — A silicon p–n junction with no applied voltage. A p–n junction is formed at the boundary between a P type and N type semiconductor created in a single crystal of semiconductor by doping, for example by ion implantation, diffusion of dopants, or… …   Wikipedia

  • History of the transistor — Invention of the transistor= The first patent [patent|US|1745175|Julius Edgar Lilienfeld: Method and apparatus for controlling electric current first filed in Canada on 22.10.1925, describing a device similar to a MESFET] for the field effect… …   Wikipedia

  • Surface-barrier transistor — The surface barrier transistor is a type of transistor developed by Philco in 1953 as an improvement to the alloy junction transistor and the earlier point contact transistor. Like the modern schottky transistor, it offered much higher speed than …   Wikipedia

  • Diffusion transistor — A diffusion transistor is any transistor formed by diffusing dopants into a semiconductor substrate. Diffusion transistors include some types of both bipolar junction transistors and field effect transistors. The diffusion process was developed… …   Wikipedia

  • Liste elektrischer Bauelemente — Dieser Artikel listet elektrische beziehungsweise elektronische Bauelemente (auch Bauteile genannt) auf, die man für Schaltungen in der Elektrotechnik beziehungsweise Elektronik benötigt. Verschiedene elektronische Bauelemente Inhaltsverzeichnis …   Deutsch Wikipedia

  • Spacistor — The spacistor [cite book last = Wolf first = Oswald coauthors = R. T. Kramer; J. Spiech; H. Shleuder title = Special Purpose Transistors: A Self Instructional Programmed Manual publisher = Prentice Hall year = 1966 pages = pp. 103 117] was a type …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”