Operators in C and C++

Operators in C and C++

This is a list of operators in the C and C++ programming languages. All the operators listed exist in C++; the fourth column "Included in C", dictates whether an operator is also present in C. Note that C does not support operator overloading.

When not overloaded, for the operators &&, ||, and , (the comma operator), there is a sequence point after the evaluation of the first operand.

C++ also contains the type conversion operators const_cast, static_cast, dynamic_cast, and reinterpret_cast which are not listed in the table for brevity. The formatting of these operators means that their precedence level is unimportant.

Most of the operators available in C and C++ are also available in other languages such as C#, Java, Perl, and PHP with the same precedence, associativity, and semantics.

Contents

Table

For the purposes of this table, a, b, and c represent valid values (literals, values from variables, or return value), object names, or lvalues, as appropriate.

Overloadable means that the operator is overloadable in C++. "Included in C" means that the operator exists and has a semantic meaning in C (operators are not overloadable in C).

Arithmetic operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T is any type)
As member of T Outside class definitions
Basic assignment a = b Yes Yes T& T::operator =(const T& b); N/A
Addition a + b Yes Yes T T::operator +(const T& b) const; T operator +(const T& a, const T& b);
Subtraction a - b Yes Yes T T::operator -(const T& b) const; T operator -(const T& a, const T& b);
Unary plus (integer promotion) +a Yes Yes T T::operator +() const; T operator +(const T& a);
Unary minus (additive inverse) -a Yes Yes T T::operator -() const; T operator -(const T& a);
Multiplication a * b Yes Yes T T::operator *(const T& b) const; T operator *(const T &a, const T& b);
Division a / b Yes Yes T T::operator /(const T& b) const; T operator /(const T& a, const T& b);
Modulo (remainder) a % b Yes Yes T T::operator %(const T& b) const; T operator %(const T& a, const T& b);
Increment Prefix ++a Yes Yes T& T::operator ++(); T& operator ++(T& a);
Suffix a++ Yes Yes T T::operator ++(int); T operator ++(T& a, int);
Note: C++ uses the unnamed dummy-parameter int to differentiate between prefix and suffix increment operators.
Decrement Prefix --a Yes Yes T& T::operator --(); T& operator --(T& a);
Suffix a-- Yes Yes T T::operator --(int); T operator --(T& a, int);
Note: C++ uses the unnamed dummy-parameter int to differentiate between prefix and suffix decrement operators.

Comparison operators/relational operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T is any type)
As member of T Outside class definitions
Equal to a == b Yes Yes bool T::operator ==(const T& b) const; bool operator ==(const T& a, const T& b);
Not equal to a != b Yes Yes bool T::operator !=(const T& b) const; bool operator !=(const T& a, const T& b);
Greater than a > b Yes Yes bool T::operator >(const T& b) const; bool operator >(const T& a, const T& b);
Less than a < b Yes Yes bool T::operator <(const T& b) const; bool operator <(const T& a, const T& b);
Greater than or equal to a >= b Yes Yes bool T::operator >=(const T& b) const; bool operator >=(const T& a, const T& b);
Less than or equal to a <= b Yes Yes bool T::operator <=(const T& b) const; bool operator <=(const T& a, const T& b);

Logical operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T is any type)
As member of T Outside class definitions
Logical negation (NOT) !a Yes Yes bool T::operator !() const; bool operator !(const T& a);
Logical AND a && b Yes Yes bool T::operator &&(const T& b) const; bool operator &&(const T& a, const T& b);
Logical OR a || b Yes Yes bool T::operator ||(const T& b) const; bool operator ||(const T& a, const T& b);

Bitwise operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T is any type)
As member of T Outside class definitions
Bitwise NOT ~a Yes Yes T T::operator ~() const; T operator ~(const T& a);
Bitwise AND a & b Yes Yes T T::operator &(const T& b) const; T operator &(const T& a, const T& b);
Bitwise OR a | b Yes Yes T T::operator |(const T& b) const; T operator |(const T& a, const T& b);
Bitwise XOR a ^ b Yes Yes T T::operator ^(const T& b) const; T operator ^(const T& a, const T& b);
Bitwise left shift[note 1] a << b Yes Yes T T::operator <<(const T& b) const; T operator <<(const T& a, const T& b);
Bitwise right shift[note 1] a >> b Yes Yes T T::operator >>(const T& b) const; T operator >>(const T& a, const T& b);

Compound assignment operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T is any type)
As member of T Outside class definitions
Addition assignment a += b Yes Yes T& T::operator +=(const T& b); T& operator +=(T& a, const T& b);
Subtraction assignment a -= b Yes Yes T& T::operator -=(const T& b); T& operator -=(T& a, const T& b);
Multiplication assignment a *= b Yes Yes T& T::operator *=(const T& b); T& operator *=(T& a, const T& b);
Division assignment a /= b Yes Yes T& T::operator /=(const T& b); T& operator /=(T& a, const T& b);
Modulo assignment a %= b Yes Yes T& T::operator %=(const T& b); T& operator %=(T& a, const T& b);
Bitwise AND assignment a &= b Yes Yes T& T::operator &=(const T& b); T& operator &=(T& a, const T& b);
Bitwise OR assignment a |= b Yes Yes T& T::operator |=(const T& b); T& operator |=(T& a, const T& b);
Bitwise XOR assignment a ^= b Yes Yes T& T::operator ^=(const T& b); T& operator ^=(T& a, const T& b);
Bitwise left shift assignment a <<= b Yes Yes T& T::operator <<=(const T& b); T& operator <<=(T& a, const T& b);
Bitwise right shift assignment a >>= b Yes Yes T& T::operator >>=(const T& b); T& operator >>=(T& a, const T& b);

Member and pointer operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T, T2 and R are any type)
As member of T Outside class definitions
Array subscript a[b] Yes Yes R& T::operator [](const T2& b);
N/A
Indirection ("object pointed to by a") *a Yes Yes R& T::operator *(); R& operator *(T& a);
Reference ("address of a") &a Yes Yes T* T::operator &(); T* operator &(T& a);
Structure dereference ("member b of object pointed to by a") a->b Yes Yes R* T::operator ->();
N/A
Structure reference ("member b of object a") a.b No Yes N/A
Member pointed to by b of object pointed to by a[note 2] a->*b Yes No R T::operator->*(R);[note 3] R operator->*(T, R);[note 3]
Member pointed to by b of object a a.*b No No N/A

Other operators

Operator name Syntax Overloadable Included
in C
Prototype examples (T, R, Arg1 and Arg2 are any type)
As member of T Outside class definitions
Function call
See Function object.
a(a1, a2) Yes Yes R T::operator ()(Arg1 a1, Arg2 a2, …); N/A
Comma a, b Yes Yes R& T::operator ,(R& b) const; R& operator ,(const T& a, R& b);
Ternary conditional a ? b : c No Yes N/A
Scope resolution a::b No No N/A
Size-of sizeof(a)[note 4]
sizeof(type)
No Yes N/A
Type identification typeid(a)
typeid(type)
No No N/A
Cast (type) a Yes Yes T::operator R() const; N/A
Note: for user-defined conversions, the return type implicitly and necessarily matches the operator name.
Allocate storage new type Yes No void* T::operator new(size_t x); void* operator new(size_t x);
Allocate storage (array) new type[n] Yes No void* T::operator new[](size_t x); void* operator new[](size_t x);
Deallocate storage delete a Yes No void T::operator delete(void* x); void operator delete(void* x);
Deallocate storage (array) delete[] a Yes No void T::operator delete[](void* x); void operator delete[](void* x);

Notes:

  1. ^ a b In the context of iostreams, writers often will refer to << and >> as the “put-to” or "stream insertion" and “get-from” or "stream extraction" operators, respectively.
  2. ^ An example can be found in "Implementing operator->* for Smart Pointers" by Scott Meyers.
  3. ^ a b In the case where the ->* operator is to work just like the default implementation, the R parameter will be method pointer to a method of the class T and the return value must be some kind of functor object that is ready to be called with (only) the method parameters.
  4. ^ The parentheses are not necessary when taking the size of a value, only when taking the size of a type. However, they are usually used regardless.

Operator precedence

The following is a table that lists the precedence and associativity of all the operators in the C and C++ languages (when the operators also exist in Java, Perl, PHP and many other recent languages, the precedence is the same as that given[citation needed]). Operators are listed top to bottom, in descending precedence. Descending precedence refers to the priority of evaluation. Considering an expression, an operator which is listed on some row will be evaluated prior to any operator that is listed on a row further below it. Operators that are in the same cell (there may be several rows of operators listed in a cell) are evaluated with the same precedence, in the given direction. An operator's precedence is unaffected by overloading.

The syntax of expressions in C and C++ is specified by a context-free grammar.[citation needed] The table given here has been inferred from the grammar.[citation needed] For the ISO C 1999 standard, section 6.5.6 note 71 states that the C grammar provided by the specification defines the precedence of the C operators, and also states that the operator precedence resulting from the grammar closely follows the specification's section ordering:

"The [C] syntax [i.e., grammar] specifies the precedence of operators in the evaluation of an expression, which is the same as the order of the major subclauses of this subclause, highest precedence first."

A precedence table, while mostly adequate, cannot resolve a few details. In particular, note that the ternary operator allows any arbitrary expression as its middle operand, despite being listed as having higher precedence than the assignment and comma operators. Thus a ? b , c : d is interpreted as a ? (b, c) : d, and not as the meaningless (a ? b), (c : d). Also, note that the immediate, unparenthesized result of a C cast expression cannot be the operand of sizeof. Therefore, sizeof (int) * x is interpreted as (sizeof(int)) * x and not sizeof ((int) *x).

Precedence Operator Description Associativity
1 :: Scope resolution (C++ only) Left-to-right
2 ++ Suffix increment
-- Suffix decrement
() Function call
[] Array subscripting
. Element selection by reference
-> Element selection through pointer
typeid() Run-time type information (C++ only) (see typeid)
const_cast Type cast (C++ only) (see const cast)
dynamic_cast Type cast (C++ only) (see dynamic_cast)
reinterpret_cast Type cast (C++ only) (see reinterpret cast)
static_cast Type cast (C++ only) (see static cast)
3 ++ Prefix increment Right-to-left
-- Prefix decrement
+ Unary plus
- Unary minus
! Logical NOT
~ Logical bitwise NOT
(type) Type cast
* Indirection (dereference)
& Address-of
sizeof Size-of
new, new[] Dynamic memory allocation (C++ only)
delete, delete[] Dynamic memory deallocation (C++ only)
4 .* Pointer to member (C++ only) Left-to-right
->* Pointer to member (C++ only)
5 * Multiplication
/ division
% modulus (remainder)
6 + Addition
- subtraction
7 << Bitwise left shift
>> Bitwise right shift
8 < For relational operators < respectively
<= For relational operators ≤ respectively
> For relational operators > respectively
>= For relational operators ≥ respectively
9 == For relational = respectively
!= For relational ≠ respectively
10 & Bitwise AND
11 ^ Bitwise XOR (exclusive or)
12 | Bitwise OR (inclusive or)
13 && Logical AND
14 || Logical OR
15 ?: Ternary conditional (see ?:) Right-to-left
16 = Direct assignment (provided by default for C++ classes)
+= Assignment by sum
-= Assignment by difference
*= Assignment by product
/= Assignment by quotient
%= Assignment by remainder
<<= Assignment by bitwise left shift
>>= Assignment by bitwise right shift
&= Assignment by bitwise AND
^= Assignment by bitwise XOR
|= Assignment by bitwise OR
17 throw Throw operator (exceptions throwing, C++ only)
18 , Comma Left-to-right

Notes

The precedence table determines the order of binding in chained expressions, when it is not expressly specified by parentheses.

  • For example, ++x*3 is ambiguous without some precedence rule(s). The precedence table tells us that: x is 'bound' more tightly to ++ than to *, so that whatever ++ does (now or later—see below), it does it ONLY to x (and not to x*3); it is equivalent to (++x, x*3).
  • Similarly, with 3*x++, where though the post-fix ++ is designed to act AFTER the entire expression is evaluated, the precedence table makes it clear that ONLY x gets incremented (and NOT 3*x); it is functionally equivalent to something like (tmp=3*x, ++x, tmp) with tmp being a temporary value.
Precedence and bindings
  • Abstracting the issue of precedence or binding, consider the diagram above. The compiler's job is to resolve the diagram into an expression, one in which several unary operators ( call them 3+( . ), 2*( . ), ( . )++ and ( . )[ i ] ) are competing to bind to y. The order of precedence table resolves the final sub-expression they each act upon: ( . )[ i ] acts only on y, ( . )++ acts only on y[i], 2*( . ) acts only on y[i]++ and 3+( . ) acts 'only' on 2*((y[i])++). It's important to note that WHAT sub-expression gets acted on by each operator is clear from the precedence table but WHEN each operator acts is not resolved by the precedence table; in this example, the ( . )++ operator acts only on y[i] by the precedence rules but binding levels alone do not indicate the timing of the Suffix ++ (the ( . )++ operator acts only after y[i] is evaluated in the expression).

Many of the operators containing multi-character sequences are given "names" built from the operator name of each character. For example, += and -= are often called plus equal(s) and minus equal(s), instead of the more verbose "assignment by addition" and "assignment by subtraction".

The binding of operators in C and C++ is specified (in the corresponding Standards) by a factored language grammar, rather than a precedence table. This creates some subtle conflicts. For example, in C, the syntax for a conditional expression is:

logical-OR-expression ? expression : conditional-expression

while in C++ it is:

logical-OR-expression ? expression : assignment-expression

Hence, the expression:

e = a < d ? a++ : a = d

is parsed differently in the two languages. In C, this expression is a syntax error, but many compilers parse it as:

e = ((a < d ? a++ : a) = d)

which is a semantic error, since the result of the conditional-expression (which might be a++) is not an lvalue. In C++, it is parsed as:

e = (a < d ? a++ : (a = d))

which is a valid expression.

The precedence of the bitwise logical operators has been criticized.[1] Conceptually, & and | are arithmetic operators like + and *.

The expression a & b == 7 is syntactically parsed as a & (b == 7) whereas the expression a + b == 7 is parsed as (a + b) == 7. This requires parentheses to be used more often than they otherwise would.

C++ operator synonyms

C++ defines[1] keywords to act as aliases for a number of operators: and (&&), bitand (&), and_eq (&=), or (||), bitor (|), or_eq (|=), xor (^), xor_eq (^=), not (!), not_eq (!=), compl (~). These can be used exactly the same way as the symbols they replace as they are not the same operator under a different name, but rather simple text aliases for the name (character string) of respective operator. For instance, bitand may be used to replace not only the bitwise operator but also the address-of operator, and it can even be used to specify reference types (e.g. int bitand ref = n;).

The ANSI C specification makes allowance for these keywords as preprocessor macros in the header file iso646.h. For compatibility with C, C++ provides the header ciso646, inclusion of which has no effect.

References

  1. ^ ISO/IEC JTC1/SC22/WG21 - The C++ Standards Committee (1 September 1998). ISO/IEC 14882:1998(E) Programming Language C++. International standardization working group for the programming language C++. pp. 40–41. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Operators, The — [Wanzhu, 1988] Film The Operators, an Emei Film Studio release, is one of several films from the late 1980s based on Wang Shuo’s fiction. The screenplay is by Wang and director Mi Jiashan. The title is also translated as The Trouble Shooters.… …   Encyclopedia of Contemporary Chinese Culture

  • Media and Publishing — ▪ 2007 Introduction The Frankfurt Book Fair enjoyed a record number of exhibitors, and the distribution of free newspapers surged. TV broadcasters experimented with ways of engaging their audience via the Internet; mobile TV grew; magazine… …   Universalium

  • Creation and annihilation operators — Quantum optics operators Ladder operators Creation and annihilation operators Displacement operator Rotation operator (quantum mechanics) Squeeze operator Anti symmetric operator Quantum corr …   Wikipedia

  • Comparison of C Sharp and Java — The correct title of this article is Comparison of C# and Java. The substitution or omission of the # sign is because of technical restrictions. Programming language comparisons General comparison Basic syntax Basic instructions …   Wikipedia

  • Comparison of Pascal and C — Programming language comparisons General comparison Basic syntax Basic instructions Arrays Associative arrays String operations …   Wikipedia

  • Python syntax and semantics — The syntax of the Python programming language is the set of rules that defines how a Python program will be written and interpreted (by both the runtime system and by human readers). Python was designed to be a highly readable language. It aims… …   Wikipedia

  • Glossary of library and information science — This page is a glossary of library and information scienceAlphanumericTOC align=center nobreak= numbers= externallinks= references= top=|A*abstract a brief set of statements that summarize, classifies, evaluates, or describes the important points …   Wikipedia

  • List of bus operators of the United Kingdom — This list is an alphabetically ordered index of current and past operators. For a structured list of current operators, see List of current bus operators of the United Kingdom This is a of bus and coach operators of the United Kingdom. The list… …   Wikipedia

  • Australian Society of Section Car Operators, Inc. — The Australian Society of Section Car Operators, Inc. (ASSCO), is an accredited railway operator that seeks access to railways for its members. It is a non profit organisation, registered under the Associations Incorporations Act (SA). Group… …   Wikipedia

  • Trinidad and Tobago Amateur Radio Society — infobox Organization name = Trinidad and Tobago Amateur Radio Society image border = size = 150px caption = msize = mcaption = abbreviation = TTARS motto = formation = 1951 extinction = type = Non profit organization status = purpose = Advocacy,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”