Crab claw sail

Crab claw sail
Micronesian proa with crab claw sail

The crab claw sail or, as it is sometimes known, Oceanic lateen or Oceanic sprit, is a triangular sail with spars along upper and lower edges. The crab claw sail is used in many traditional Pacific Ocean cultures, as can be seen by the traditional proa and tepukei.

Contents

Construction

The crab claw sail consists of a sail, approximately an isosceles triangle in shape. The equal length sides are longer than the third side, with spars along the long sides. The forward intersection of the upper spar, or yard, is placed towards the bow. The sail is supported by a short mast attached near the middle of the yard, and the forward corner is attached to the hull. The lower spar, or boom, is attached at the forward intersection, but is not attached to the mast. The crab claw is a shunting sail. It is used on a boat which has a permanent windward and leeward side, and exchanges one end for the other when coming about, such as a proa.

To shunt, or switch directions across the wind, the forward corner of the sail is loosened and then transferred to the opposite end of the boat. While remaining attached to the top of the mast, the upper spar tilts to vertical and beyond as the forward corner moves past the mast and onward to the other end of the boat. Meanwhile, the mainsheet is detached and used to rotate the rearward end of the boom through a horizontal half circle. The forward corner is then re-attached at the new "forward" end of the boat and the mainsheet is re-tightend at the new "rearward" end.[1][2]

The crab claw is often compared with the tacking lateen sail. While it is possible for the sails to be identical, the two rigs are not identical. The crab claw pivots around the leading edge spar, while a lateen sail on a tacking boat such as a Sunfish pivots around a mast. Many lateen sails have an arrangement to move the gooseneck on the boom; as the gooseneck moves forward, the axis of rotation moves forward as well, and the sail looks and acts more and more like a crab claw while under way.

The crab claw is also traditionally constructed with curved spars, giving the edges of the sail along the spars a convex shape, while the leech of the sail is often quite concave to keep it stiff on the trailing edge. These features give it its distinct, claw-like shape. Modern crab claws generally have straighter spars and a less convex leech, which gives more sail area for a given length of spar.

Performance

The crab-claw sail is something of an enigma. It has been demonstrated to produce very large amounts of lift when reaching, and overall seems superior to any other simple sail plan (this discounts the use of specialised sails such as spinnakers). C. A. Marchaj, a researcher who has experimented extensively with both modern rigs for racing sailboats and traditional sailing rigs from around the world, has done wind tunnel testing of scale models of crab-claw rigs. One popular but disputed theory is that the crab-claw wing works like a delta wing, generating vortex lift. Since the crab claw does not lie symmetric to the airflow, like an aircraft delta wing, but rather lies with the lower spar nearly parallel to the water, the airflow is not symmetric.

This can clearly be seen in Marchaj's wind tunnel photos published in Sail Performance: Techniques to Maximise Sail Power (ISBN 0-07-141310-3). The vortex on the top spar of the sail is much larger, covering most of the sail area, while the lower vortex is very small and stays close to the spar. Marchaj attributes the large lifting power of the sail to lift generated by the vortices, while others attribute the power to a favourable mix of aspect ratio, camber and (lack of) twist at this point of sail.[3][4]

Crab-Sails On Other Sailboats

"Rapa Nui" is a 51-ft catamaran designed by James Wharram and owned by Hans Kaar. [5]

Shell Boats of Vermont USA offers a kit or completed 21-ft catamaran. [6]


Crab claw sail being constructed for Hot Buoys Trimaran. Notice pocket in right hand edge of sail to hold spar. Second spar in this particular configuration is not required since a bolt rope holds the sail's upper edge and the mast is located in the back of the sailboat.

"Hot Buoys" is a 65-ft trimaran with a mast-aft supported crab-claw sail. Video in external links.

"Epicure" is a 47-ft cruising proa designed, and built by Daniel Charles. It was launched in 2010 and has a few luxuries not common in traditional Polynesian crafts including a washing machine/dryer and dishwasher[7]

External links

References

  1. ^ "Die pazifische proa". 2007. http://video.google.com/videoplay?docid=7025891417097055070#6m54s. Retrieved 2009-09-24. "The link starts the video at 6m56s where a shunting maneuver starts. Another shunt occurs at 9m33s." 
  2. ^ Michael Schacht, Proafile.com (2001-03-07). "Proafile Rig Options - Crab Claw". http://www.proafile.com/view/weblog/comments/rig_options_crab_claw/. Retrieved 2009-09-24. 
  3. ^ Marchaj, C. A.. Sail Performance: Techniques to Maximise Sail Power. ISBN 0-07-141310-3. 
  4. ^ "Delta Sail in A "Wind Tunnel" Experiences from B.J. Slotboom". http://www.multihull.de/technik/t-slotboom_gb.htm. 
  5. ^ [http://www.atomvoyages.com/articles/hansklaar.htm "An interview with cruising trader Hans Klaar aboard the 51-foot Wharram cat Rapa Nui By James Baldwin"]. http://www.atomvoyages.com/articles/hansklaar.htm. 
  6. ^ "Shell Boats CrabClaw Cat". http://www.shellboats.com/sbboats.html#anchor_CrabClawCat. 
  7. ^ "Epicure, 47’ Cruising Proa". http://proafile.com/view/magazine/article/proafile_exclusive_epicure_47_cruising_proa. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • crab claw — noun 1. : a claw or clutch for grappling or fastening : pawl 2. : an Oceanian lateen sail …   Useful english dictionary

  • Parts of a sail — In sailing the parts of a sail have common terminology for each corner and edge of the sail. Contents 1 Triangular Sails 1.1 The corners 1.2 The edges 1.3 The roach …   Wikipedia

  • Moonraker (sail) — The highest sail is moonsail, lower sky sail and royal sail …   Wikipedia

  • Course (sail) — Illustration of the foremast of the Stavros S Niarchos. The course sail is the lowermost sail. In sailing, a course is the lowermost sail on a mast. This term is used predominantly in the plural to describe the lowest sails on a square rigged… …   Wikipedia

  • Draft (sail) — In nautical parlance, the draft or draught of a sail is a degree of curvature in a horizontal cross section. Any sail experiences a force from the prevailing wind just because it impedes the air s passage. A sail with draft also functions as an… …   Wikipedia

  • Driver (sail) — A driver is a kind of sail used on some sailboats. Smaller than a fore and aft spanker on a square rigger, a driver is tied to the same spars. References v …   Wikipedia

  • Proa — A proa or prau is a type of multihull sailing vessel. While the word proa just means boat in its native language, the term proa in Western languages has come to describe a vessel consisting of two (usually) unequal length parallel hulls, sailed… …   Wikipedia

  • Mast aft rig — A mast aft rig, alternately referred to as aft mast rig, is a sailboat sail plan that uses a single mast set in the aft half of the hull. The mast supports fore sails that may consist of a single jib multiple staysails, or a crab claw sail. The… …   Wikipedia

  • Lateen — A lateen (from a la trina , meaning triangular) or latin rig is a triangular sail set on a long yard mounted at an angle on the mast, and running in a fore and aft direction. In western culture, the rig is originally reported found on sailing… …   Wikipedia

  • Tepukei — A Tepukei (from Te Puke , meaning an ocean going canoe)is a very old Melanesian boat type, first reported by Spanish explorer Álvaro de Mendaña in 1595, on his visit to the Santa Cruz Islands. However, its possible source may be the Polynesian… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”