Stopband

Stopband

A stopband is a band of frequencies, between specified limits, in which a circuit, such as a filter or telephone circuit, does not let signals through, or the attenuation is above the required stopband attenuation level. Depending on application, the required attenuation within the stopband may typically be a value between 20 and 120 dB higher than the nominal passband attenuation, which often is 0 dB.

The lower and upper "limiting frequencies", also denoted lower and upper stopband corner frequencies, are the frequencies where the stopband and the transition bands meet in a filter specification. The stopband of a low-pass filter is the frequencies from the stopband corner frequency (which is slightly higher than the passband 3dB cut-off frequency) up to the infinite frequency. The stopband of a high-pass filter consists of the frequencies from 0 Hertz to a stopband corner frequency (slightly lower than the passband cut-off frequency).

A band-stop filter has one stopband, specified by two non-zero and non-infinite corner frequencies. The difference between the limits in the band-stop filter is the stopband bandwidth, which usually is expressed in hertz.

A bandpass filter has two stopbands. The shape factor of a bandpass filter is the relationship between the 3dB bandwidth, and the difference between the stopband limits.

See also

* Passband
* Band-stop filter
* Band gap in solid state physics
* Band rejection


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • stopband — noun A band of frequencies in which an electronic filter will not let signals pass through …   Wiktionary

  • stopband — bandstop …   Anagrams dictionary

  • stopband — …   Useful english dictionary

  • bandstop — stopband …   Anagrams dictionary

  • Composite image filter — Linear analog electronic filters Network synthesis filters Butterworth filter Chebyshev filter Elliptic (Cauer) filter Bessel filter Gaussian filter Optimum L (Legendre) filter Linkwitz Riley filter …   Wikipedia

  • Elliptic filter — An elliptic filter (also known as a Cauer filter, named after Wilhelm Cauer) is an electronic filter with equalized ripple (equiripple) behavior in both the passband and the stopband. The amount of ripple in each band is independently adjustable …   Wikipedia

  • Chebyshev filter — Linear analog electronic filters Network synthesis filters Butterworth filter Chebyshev filter Elliptic (Cauer) filter Bessel filter Gaussian filter Optimum L (Legendre) filter Linkwitz Riley filter …   Wikipedia

  • Distributed element filter — Figure 1. A circuit featuring many of the f …   Wikipedia

  • Network synthesis filters — Network synthesis is a method of designing signal processing filters. It has produced several important classes of filter including the Butterworth filter, the Chebyshev filter and the Elliptic filter. It was originally intended to be applied to… …   Wikipedia

  • Cutoff frequency — This article is about signal processing. For other uses, see Cutoff (disambiguation). Magnitude transfer function of a bandpass filter with lower 3 dB cutoff frequency f1 and upper 3dB cutoff frequency f2 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”