Stiffness

Stiffness

Stiffness is the resistance of an elastic body to deformation by an applied force. It is an extensive material property.

Definition

The stiffness, "k", of a body is a measure of the resistance offered by an elastic body to deformation (bending, stretching or compression).

:k=frac {P} {delta}

where:"P" is a steady force applied on the body:δ is the displacement produced by the force (for instance, the deflection of a beam, or the change in length of a stretched spring)

In the International System of Units, stiffness is typically measured in newtons per metre.

As both the applied force and displacement are vectors (respectively "P" and δ), in general their relationship is characterised by a stiffness matrix, "k", where:

: P=k delta ,

The displacement can, in general, refer to a point distinct from that where the force is applied and a complicated structure will not deflect purely in the same direction as an applied force. The stiffness matrix enables such systems to be characterised in straightforward terms.

The inverse of stiffness is "compliance", typically measured in units of metres per newton. In rheology it may be defined as the ratio of strain to stress [V. GOPALAKRISHNAN and CHARLES F. ZUKOSKI; “Delayed flow in thermo-reversible colloidal gels”; Journal of Rheology; Society of Rheology, U.S.A.; July/August 2007; 51 (4): pp. 623–644.] , and so take the units of reciprocal stress, "e.g". 1/Pa.

Rotational stiffness

A body may also have a rotational stiffness, "k", given by

:k=frac {M} { heta}

where: "M" is the applied moment: "θ" is the rotation

In the SI system, rotational stiffness is typically measured in newton-metres per radian.

In the SAE system, rotational stiffness is typically measured in inch-pounds per degree.

Further measures of stiffness are derived on a similar basis, including:

* shear stiffness - ratio of applied shear force to shear deformation
* torsional stiffness - ratio of applied torsion moment to angle of twist

Relationship to elasticity

In general, elastic modulus is not the same as stiffness. Elastic modulus is a property of the constituent material; stiffness is a property of a solid body. That is, the modulus is an intensive property of the material; stiffness, on the other hand, is an extensive property of the solid body dependent on the material "and" the shape and boundary conditions. For example, for an element in tension or compression, the axial stiffness is

:k=frac {AE} {L}

where:"A" is the cross-sectional area,:"E" is the (tensile) elastic modulus (or Young's modulus),:"L" is the length of the element.

For the special case of unconstrained uniaxial tension or compression, Young's modulus "can" be thought of as a measure of the stiffness of a material.

Use in engineering

The stiffness of a structure is of principal importance in many engineering applications, so the modulus of elasticity is often one of the primary properties considered when selecting a material. A high modulus of elasticity is sought when deflections are undesirable, while a low modulus of elasticity is required when flexibility is needed.

References

See also

*Elasticity
*Elastic modulus
*Hardness
*Moment of inertia
*Young's modulus
*Hooke's law


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат
Synonyms:

Look at other dictionaries:

  • Stiffness — Stiff ness, n. The quality or state of being stiff; as, the stiffness of cloth or of paste; stiffness of manner; stiffness of character. [1913 Webster] The vices of old age have the stiffness of it too. South. [1913 Webster] …   The Collaborative International Dictionary of English

  • Stiffness — Stiffness. См. Жесткость. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • stiffness — index formality Burton s Legal Thesaurus. William C. Burton. 2006 …   Law dictionary

  • stiffness —  Stiffness  Жесткость   Мера податливости тела деформации при заданном типе нагрузки: чем больше жесткость, тем меньше деформация. В случаях малых одномерных деформаций (в пределах зоны упругости, где справедлив закон Гука) жёсткость можно… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • stiffness — this is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness …   Mechanics glossary

  • stiffness — A stiff ship is one which have a short period of roll and therefore will roll uncomfortably. See lateral stiffness roll stiffness torsional stiffness …   Dictionary of automotive terms

  • stiffness — noun 1. the physical property of being inflexible and hard to bend (Freq. 1) • Derivationally related forms: ↑stiff • Hypernyms: ↑inelasticity 2. the property of moving with pain or difficulty (Freq. 1) he awoke with a painful stiffness in his… …   Useful english dictionary

  • stiffness — noun Stiffness is used after these nouns: ↑muscle …   Collocations dictionary

  • stiffness — standumas statusas T sritis automatika atitikmenys: angl. rigidity; stiffness vok. Righeit, f; Starrheit, f; Steifigkeit, f rus. жёсткость, f pranc. raideur, f; rigidité, f …   Automatikos terminų žodynas

  • stiffness — standumas statusas T sritis Standartizacija ir metrologija apibrėžtis Medžiagos savybė priešintis deformacijai. atitikmenys: angl. stiffness vok. Righeit, f; Starrheit, f; Steifigkeit, f rus. жесткость, f pranc. rigidité, f …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”