Hough transform

Hough transform

The Hough transform (pronEng|ˈhʌf, rhymes with "tough") is a feature extraction technique used in image analysis, computer vision, and digital image processing. [Shapiro, Linda and Stockman, George. “Computer Vision,” Prentice-Hall, Inc. 2001] The purpose of the technique is to find imperfect instances of objects within a certain class of shapes by a voting procedure. This voting procedure is carried out in a parameter space, from which object candidates are obtained as local maxima in a so-called accumulator space that is explicitly constructed by the algorithm for computing the Hough transform.

The classical Hough transform was concerned with the identification of lines in the image, but later the Hough transform has been extended to identifying positions of arbitrary shapes, most commonly circles or ellipses. The Hough transform as it is universally used today was invented by Richard Duda and Peter Hart in 1972, who called it a "generalized Hough transform" [Duda, R. O. and P. E. Hart, "Use of the Hough Transformation to Detect Lines and Curves in Pictures," "Comm. ACM, Vol. 15", pp. 11–15 (January, 1972)] after the related 1962 patent of Paul Hough. [P.V.C. Hough, "Machine Analysis of Bubble Chamber Pictures," Proc. Int. Conf. High Energy Accelerators and Instrumentation, 1959] The transform was popularized in the computer vision community by Dana H. Ballard through a 1981 journal article titled "Generalizing the Hough transform to detect arbitrary shapes".

Theory

In automated analysis of digital images, a subproblem often arises of detecting simple shapes, such as straight lines, circles or ellipses. In many cases an edge detector can be used as a pre-processing stage to obtain image points or image pixels that are on the desired curve in the image space. Due to imperfections in either the image data or the edge detector, however, there may be missing points or pixels on the desired curves as well as spatial deviations between the ideal line/circle/ellipse and the noisy edge points as they are obtained from the edge detector. For these reasons, it is often non-trivial to group the extracted edge features to an appropriate set of lines, circles or ellipses. The purpose of the Hough transform is to address this problem by making it possible to perform groupings of edge points into object candidates by performing an explicit voting procedure over a set of parameterized image objects(Shapiro and Stockman, 304).

The simplest case of Hough transform is the linear transform for detecting straight lines. In the image space, the straight line can be described as y = mx + b and can be graphically plotted for each pair of image points (x,y). In the Hough transform, a main idea is to consider the characteristics of the straight line not as image points x or y, but in terms of its parameters, here the slope parameter m and the intercept parameter b. Based on that fact, the straight line y = mx + b can be represented as a point (b, m) in the parameter space. However, one faces the problem that vertical lines give rise to unbounded values of the parameters m and b. For computational reasons, it is therefore better to parameterize the lines in the Hough transform with two other parameters, commonly referred to as r and heta ("theta"). The parameter r represents the distance between the line and the origin, while heta is the angle of the vector from the origin to this closest point (see Coordinates). Using this parametrization, the equation of the line can be written as [cite web |url=http://www.ai.sri.com/pubs/files/tn036-duda71.pdf | title=Use of the Hough Transformation to Detect Lines and Curves in Pictures]

:y = left(-{cos hetaoversin heta} ight)x + left({rover{sin heta ight),

which can be rearranged to r = x cos heta+ysin heta (Shapiro and Stockman, 304).

It is therefore possible to associate to each line of the image, a couple ("r,θ") which is unique if heta in [0,pi] and r in mathbf{R}, or if heta in [0,2pi] and r geq 0. The ("r,θ") plane is sometimes referred to as "Hough space" for the set of straight lines in two dimensions. This representation makes the Hough transform conceptually very close to the two-dimensional Radon transform.

An infinite number of lines can pass through a single point of the plane. If that point has coordinates (x_0,y_0) in the image plane, all the lines that go through it obey the following equation:

r( heta) = x_{0}cdotcos heta+y_{0}cdotsin heta

This corresponds to a sinusoidal curve in the ("r,θ") plane, which is unique to that point. If the curves corresponding to two points are superimposed, the location (in the "Hough space") where they cross correspond to lines (in the original image space) that pass through both points. More generally, a set of points that form a straight line will produce sinusoids which cross at the parameters for that line. Thus, the problem of detecting colinear points can be converted to the problem of finding concurrent curves. [cite web |url=http://planetmath.org/encyclopedia/HoughTransform.html| title=Hough Transform]

Implementation

The Hough transform algorithm uses an array, called accumulator, to detect the existence of a line y = mx + b. The dimension of the accumulator is equal to the number of unknown parameters of the Hough transform problem. For example, the linear Hough transform problem has two unknown parameters: m and b. The two dimensions of the accumulator array would correspond to quantized values for m and b. For each pixel and its neighborhood, the Hough transform algorithm determines if there is enough evidence of an edge at that pixel. If so, it will calculate the parameters of that line, and then look for the accumulator's bin that the parameters fall into, and increase the value of that bin. By finding the bins with the highest values, typically by looking for local maxima in the accumulator space, the most likely lines can be extracted, and their (approximate) geometric definitions read off. (Shapiro and Stockman, 304) The simplest way of finding these "peaks" is by applying some form of threshold, but different techniques may yield better results in different circumstances - determining which lines are found as well as how many. Since the lines returned do not contain any length information, it is often next necessary to find which parts of the image match up with which lines. Moreover, due to imperfection errors in the edge detection step, there will usually be errors in the accumulator space, which may make it non-trivial to find the appropriate peaks, and thus the appropriate lines.

Example

Consider three data points, shown here as black dots.

*For each data point, a number of lines are plotted going through it, all at different angles. These are shown here as solid lines.
*For each solid line a line is plotted which is perpendicular to it and which intersects the origin. These are shown as dashed lines.
*The length and angle of each dashed line is measured. In the diagram above, the results are shown in tables.
*This is repeated for each data point.
*A graph of length against angle, known as a Hough space graph, is then created.

The point where the lines intersect gives a distance and angle. This distance and angle indicate the line which bisects the points being tested. In the graph shown the lines intersect at the purple point; this corresponds to the solid purple line in the diagrams above, which bisects the three points.

The following is a different example showing the results of a Hough transform on a raster image containing two thick lines.

The results of this transform were stored in a matrix. Cell value represents the number of curves through any point. Higher cell values are rendered brighter. The two distinctly bright spots are the Hough parameters of the two lines. From these spots' positions, angle and distance from image center of the two lines in the input image can be determined.

Variations and extensions

Using the gradient direction to reduce the number of votes

An improvement suggested by O'Gorman and Clowes can be used to detect lines if one takes into account that the local gradient of the image intensity will necessarily be orthogonal to the edge. Since edge detection generally involves computing the intensity gradient magnitude, the gradient direction is often found as a side effect. If a given point of coordinates ("x,y") happens to indeed be on a line, then the local direction of the gradient gives the "θ" parameter corresponding to said line, and the "r" parameter is then immediately obtained. (Shapiro and Stockman, 305) In fact, the real gradient direction is only estimated with a given amount of accuracy (approximately ±20°), which means that the sinusoid must be traced around the estimated angle, ±20°. This however reduces the computation time and has the interesting effect of reducing the number of useless votes, thus enhancing the visibility of the spikes corresponding to real lines in the image.

Kernel-based Hough transform

Fernandes and Oliveira [ [http://dx.doi.org/10.1016/j.patcog.2007.04.003 Fernandes, L.A.F. and Oliveira, M.M., "Real-time line detection through an improved Hough transform voting scheme," "Pattern Recognition, Elsevier, Volume 41, Issue 1", pp. 299–314 (January, 2008)] .] suggested an improved voting scheme for the Hough transform that allows a software implementation to achieve real-time performance even on relatively large images (e.g., 1280×960). The " [http://www.inf.ufrgs.br/~laffernandes/kht.html Kernel-based Hough transform] " uses the same (r, heta) parameterization proposed by Duda and Hart but operates on clusters of approximately collinear pixels. For each cluster, votes are cast using an oriented elliptical-Gaussian kernel that models the uncertainty associated with the best-fitting line with respect to the corresponding cluster. The approach not only significantly improves the performance of the voting scheme, but also produces a much cleaner accumulator and makes the transform more robust to the detection of spurious lines.

Hough transform of curves, and Generalised Hough transform

Although the version of the transform described above applies only to finding straight lines, a similar transform can be used for finding any shape which can be represented by a set of parameters. A circle, for instance, can be transformed into a set of three parameters, representing its center and radius, so that the Hough space becomes three dimensional. Arbitrary ellipses and curves can also be found this way, as can any shape easily expressed as a set of parameters. For more complicated shapes, the Generalised Hough transform is used, which allows a feature to vote for a particular position, orientation and/or scaling of the shape using a predefined look-up table.

Using weighted features

One common variation detail. That is, finding the bins with the highest count in one stage can be used to constrain the range of values searched in the next.

Limitations

The Hough Transform is only efficient if a high number of votes fall in the right bin, so that the bin can be easily detected amid the background noise. This means that the bin must not be too small, or else some votes will fall in the neighboring bins, thus reducing the visibility of the main bin. [ [http://homepages.inf.ed.ac.uk/rbf/HIPR2/hough.htm Image Transforms - Hough Transform ] ]

Also, when the number of parameters is large (that is, when we are using the Hough Transform with typically more than three parameters), the average number of votes cast in a single bin is very low, and those bins corresponding to a real figure in the image do not necessarily appear to have a much higher number of votes than their neighbors. Thus, the Hough Transform must be used with great care to detect anything other than lines or circles. This also, increases the complexity with each additional parameter. mathcal{O}left({A^{m-2 ight) where A is the image space and m is the number of parameters. (Shapiro and Stockman, 310)

Finally, much of the efficiency of the Hough Transform is dependent on the quality of the input data: the edges must be detected well for the Hough Transform to be efficient. Use of the Hough Transform on noisy images is a very delicate matter and generally, a denoising stage must be used before. In the case where the image is corrupted by speckle, as is the case in radar images, the Radon transform is sometimes preferred to detect lines, since it has the nice effect of attenuating the noise through summation.

History

It was initially invented for machine analysis of bubble chamber photographs (Hough, 1959).

The Hough transform was patented as US patent|3069654 in 1962 by IBM with the name "Method and Means for Recognizing Complex Patterns".("Hough Transform," Planet Math) This patent uses a slope-intercept parametrization for straight lines, which awkwardly leads to an unbounded transform space since the slope can go to infinity.

The rho-theta parametrization universally used today was first described in

:Duda, R. O. and P. E. Hart, "Use of the Hough Transformation to Detect Lines and Curves in Pictures," "Comm. ACM, Vol. 15", pp. 11–15 (January, 1972),

although it was already standard for the Radon transform since at least the 1930s.

O'Gorman and Clowes' variation is described in

:Frank O'Gorman, MB Clowes: Finding Picture Edges Through Collinearity of Feature Points. IEEE Trans. Computers 25(4): 449-456 (1976)

References

External links

* http://www.rob.cs.tu-bs.de/content/04-teaching/06-interactive/Hough.html - Java Applet + Source for learning the Hough transformation in slope-intercept form
* http://www.rob.cs.tu-bs.de/content/04-teaching/06-interactive/HNF.html - Java Applet + Source for learning the Hough-Transformation in normal form
* http://homepages.inf.ed.ac.uk/rbf/HIPR2/hough.htm
* http://imaging.gmse.net/articledeskew.html - Deskew images using Hough transform (Visual Basic source code)Tarsha-Kurdi, F., Landes, T., Grussenmeyer, P., 2007a. Hough-transform and extended RANSAC algorithms for automatic detection of 3d building roof planes from Lidar data. ISPRS Proceedings. Workshop Laser scanning. Espoo, Finland, September 12-14, 2007.

ee also

* Generalised Hough Transform
* Radon Transform
* Fourier Transform


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Generalised Hough transform — The Generalised Hough Transform, introduced by D.H. Ballard in 1981, was the modification of the Hough Transform using the principle of template matching [D.H. Ballard, Generalizing the Hough Transform to Detect Arbitrary Shapes , Pattern… …   Wikipedia

  • Generalised Hough Transform — The Generalized Hough Transform, introduced by D.H. Ballard in 1981, was a modification of the Hough Transform using the principle of template matching [D.H. Ballard, Generalizing the Hough Transform to Detect Arbitrary Shapes , Pattern… …   Wikipedia

  • Hough — may refer to;The term for hamstringing or severing the Achilles tendon of an animal, particularly to disable warrior animals such as an enemy s chariot horses.In the Scots language, hough or haugh refers to the leg or shin of an animal, from… …   Wikipedia

  • Hough-Transformation — Die Hough Transformation (Sprechweise [hʌf]) ist ein robustes globales Verfahren zur Erkennung von Geraden, Kreisen oder beliebigen anderen parametrisierbaren geometrischen Figuren in einem binären Gradientenbild, also einem schwarz/weiß Bild,… …   Deutsch Wikipedia

  • Hough Transformation — Die Hough Transformation (Sprechweise [hʌf]) ist ein robustes globales Verfahren zur Erkennung von Geraden, Kreisen oder beliebigen anderen parametrisierbaren geometrischen Figuren in einem binären Gradientenbild, also einem schwarz/weiß Bild,… …   Deutsch Wikipedia

  • Scale-invariant feature transform — Feature detection Output of a typical corner detection algorithm …   Wikipedia

  • Transformee de Hough — Transformée de Hough La transformée de Hough est une technique de reconnaissance de formes inventée en 1962 par Paul Hough, utilisée dans le traitement d images numériques. L application la plus simple permet de reconnaître les lignes d une image …   Wikipédia en Français

  • Transformée de hough — La transformée de Hough est une technique de reconnaissance de formes inventée en 1962 par Paul Hough, utilisée dans le traitement d images numériques. L application la plus simple permet de reconnaître les lignes d une image, mais des… …   Wikipédia en Français

  • Transformée de Hough — La transformée de Hough est une technique de reconnaissance de formes inventée en 1962 par Paul Hough, utilisée dans le traitement d images numériques. L application la plus simple permet de reconnaître les lignes d une image, mais des… …   Wikipédia en Français

  • Radon transform — In mathematics, the Radon transform in two dimensions, named after the Austrian mathmematician Johann Radon, is the integral transform consisting of the integral of a function over straight lines. The inverse of the Radon transform is used to… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”