Affine transformation

Affine transformation

In geometry, an affine transformation or affine map or an affinity (from the Latin, "affinis", "connected with") between two vector spaces (strictly speaking, two affine spaces) consists of a linear transformation followed by a translation::x mapsto A x+ b

In the finite-dimensional case each affine transformation is given by a matrix A and a vector "b", satisfying certain properties described below.

Physically, an affine transformation is one that preserves
# Collinearity between points, i.e., three points which lie on a line continue to be collinear after the transformation
# Ratios of distances along a line, i.e., for distinct colinear points p_1, p_2, p_3, the ratio |p_2-p_1| / |p_3-p_2| is preserved

In general, an affine transform is composed of zero or more linear transformations (rotation, scaling or shear) and a translation (or "shift"). Several linear transformations can be combined into a single matrix, thus the general formula given above is still applicable.

Representation of affine transformations

Ordinary vector algebra uses matrix multiplication to represent linear transformations, and vector addition to represent translations. Using an augmented matrix, it is possible to represent both using matrix multiplication. The technique requires that all vectors are augmented with a "1" at the end, and all matrices are augmented with an extra row of zeros at the bottom, an extra column — the translation vector — to the right, and a "1" in the lower right corner. If "A" is a matrix,

:egin{bmatrix} vec{y} \ 1 end{bmatrix} = egin{bmatrix} A & vec{b} \ 0, ldots, 0 & 1 end{bmatrix} egin{bmatrix} vec{x} \ 1 end{bmatrix}

is equivalent to the following

:vec{y} = A vec{x} + vec{b}.

Ordinary matrix-vector multiplication always maps the origin to the origin, and could therefore never represent a translation, in which the origin must necessarily be mapped to some other point. By appending a "1" to every vector, one essentially considers the space to be mapped as a subset of a space with an additional dimension. In that space, the original space occupies the subset in which the final index is 1. Thus the origin of the original space can be found at (0,0, ... 0, 1). A translation within the original space by means of a linear transformation of the higher-dimensional space is then possible (specifically, a shear transformation). This is an example of homogeneous coordinates.

The advantage of using homogeneous coordinates is that one can combine any number of affine transformations into one by multiplying the matrices. This is used extensively by graphics software.

Properties of affine transformations

An affine transformation is invertible if and only if "A" is invertible. In the matrix representation, the inverse is:

:egin{bmatrix} A^{-1} & -A^{-1}vec{b} \ 0,ldots,0 & 1 end{bmatrix}.

The invertible affine transformations form the affine group, which has the general linear group of degree "n" as subgroup and is itself a subgroup of the general linear group of degree "n" + 1.

The similarity transformations form the subgroup where "A" is a scalar times an orthogonal matrix. If and only if the determinant of "A" is 1 or –1 then the transformation preserves area; these also form a subgroup. Combining both conditions we have the isometries, the subgroup of both where "A" is an orthogonal matrix.

Each of these groups has a subgroup of transformations which preserve orientation: those where the determinant of "A" is positive. In the last case this is in 3D the group of rigid body motions (proper rotations and pure translations).

For any matrix "A" the following propositions are equivalent:
*"A" – "I" is invertible
*"A" does "not" have an eigenvalue equal to 1
*for all "b" the transformation has exactly one fixed point
*there is a "b" for which the transformation has exactly one fixed point
*affine transformations with matrix "A" can be written as a linear transformation with some point as origin

If there is a fixed point we can take that as the origin, and the affine transformation reduces to a linear transformation. This may make it easier to classify and understand the transformation. For example, describing a transformation as a rotation by a certain angle with respect to a certain axis is easier to get an idea of the overall behavior of the transformation than describing it as a combination of a translation and a rotation. However, this depends on application and context. Describing such a transformation for an "object" tends to make more sense in terms of rotation about an axis through the center of that object, combined with a translation, rather than by just a rotation with respect to some distant point. For example "move 200 m north and rotate 90° anti-clockwise", rather than the equivalent "with respect to the point 141 m to the northwest, rotate 90° anti-clockwise".

Affine transformations in 2D without fixed point (so where "A" has eigenvalue 1) are:
*pure translations
*scaling in a given direction, with respect to a line in another direction (not necessarily perpendicular), combined with translation that is not purely in the direction of scaling; the scale factor is the other eigenvalue; taking "scaling" in a generalized sense it includes the cases that the scale factor is zero (projection) and negative; the latter includes reflection, and combined with translation it includes glide reflection.
*shear combined with translation that is not purely in the direction of the shear (there is no other eigenvalue than 1; it has algebraic multiplicity 2, but geometric multiplicity 1)

Affine transformations and linear transformations

In a geometric setting, affine transformations are precisely the functions that map straight lines to straight lines.

A linear transformation is a function that preserves all linear combinations; an affine transformation is a function that preserves all affine combinations. An affine combination is a linear combination in which the sum of the coefficients is 1.

An affine subspace of a vector space (sometimes called a linear manifold) is a coset of a linear subspace; i.e., it is the result of adding a constant vector to every element of the linear subspace.A linear subspace of a vector space is a subset that is closed under linear combinations; an affine subspace is one that is closed under affine combinations.

For example, in "R""3", the origin, lines and planes through the origin and the whole space are linear subspaces, while points, lines and planes in general as well as the whole space are the affine subspaces.

Just as members of a set of vectors are linearly independent if none is a linear combination of the others, so also they are affinely independent if none is an affine combination of the others. The set of linear combinations of a set of vectors is their "linear span" and is always a linear subspace; the set of all affine combinations is their "affine span" and is always an affine subspace. For example, the affine span of a set of two points is the line that contains both; the affine span of a set of three non-collinear points is the plane that contains all three. Vectors

:v1, v2, ..., v"n"

are linearly dependent if there exists a vector a

:a = ["a"1, "a"2, … ,"a""n"] T

such that both:

:∃ "i" ∊ [1, …, "n"] : "a""i" ≠ 0

and

: [v1, v2, … , v"n"] × a = 0

are true.

Similarly they are affinely dependent if the same is true and also

: sum_{i=1}^n a_i = 1

Vector a is an affine dependence among the vectors v1, v2, …, v"n".

The set of all invertible affine transformations forms a group under the operation of composition of functions. That group is called the affine group, and is the semidirect product of "K""n" and GL("n", "k").

Affine transformation of the plane

To visualise the general affine transformation of the Euclidean plane, take labelled parallelograms "ABCD" and "A′B′C′D′". Whatever the choices of points, there is an affine transformation "T" of the plane taking "A" to "A′", and each vertex similarly. Supposing we exclude the degenerate case where "ABCD" has zero area, there is a unique such affine transformation "T". Drawing out a whole grid of parallelograms based on "ABCD", the image "T"("P") of any point "P" is determined by noting that "T"("A") = "A′", "T" applied to the line segment "AB" is "A′B′", "T" applied to the line segment "AC" is "A′C′", and "T" respects scalar multiples of vectors based at "A". [If "A", "E", "F" are colinear then the ratio length("AF")/length("AE") is equal to length("A"′"F"′)/length("A"′"E"′).] Geometrically "T" transforms the grid based on "ABCD" to that based in "A′B′C′D′".

Affine transformations don't respect lengths or angles; they multiply area by a constant factor

:area of "A′ B′ C′ D′" / area of "ABCD".

A given "T" may either be "direct" (respect orientation), or "indirect" (reverse orientation), and this may be determined by its effect on "signed" areas (as defined, for example, by the cross product of vectors).

Example of an affine transformation

The following equation expresses an affine transformation in GF(2) (with "+" representing XOR):

:{,a',} = M{,a,} + {,v,}.

where [M] is the matrix

:egin{bmatrix}1&0&0&0&1&1&1&1 \1&1&0&0&0&1&1&1 \1&1&1&0&0&0&1&1 \1&1&1&1&0&0&0&1 \1&1&1&1&1&0&0&0 \0&1&1&1&1&1&0&0 \0&0&1&1&1&1&1&0 \0&0&0&1&1&1&1&1end{bmatrix}

and {"v"} is the vector

:egin{bmatrix} 1 \ 1 \ 0 \ 0 \ 0 \ 1 \ 1 \ 0 end{bmatrix}.

For instance, the affine transformation of the element {a} = "x"7 + "x"6 + "x"3 + "x" = {11001010} in big-endian binary notation = {CA} in big-endian hexadecimal notation, is calculated as follows:

:a_0' = a_0 oplus a_4 oplus a_5 oplus a_6 oplus a_7 oplus 1 = 0 oplus 0 oplus 0 oplus 1 oplus 1 oplus 1 = 1:a_1' = a_0 oplus a_1 oplus a_5 oplus a_6 oplus a_7 oplus 1 = 0 oplus 1 oplus 0 oplus 1 oplus 1 oplus 1 = 0:a_2' = a_0 oplus a_1 oplus a_2 oplus a_6 oplus a_7 oplus 0 = 0 oplus 1 oplus 0 oplus 1 oplus 1 oplus 0 = 1:a_3' = a_0 oplus a_1 oplus a_2 oplus a_3 oplus a_7 oplus 0 = 0 oplus 1 oplus 0 oplus 1 oplus 1 oplus 0 = 1:a_4' = a_0 oplus a_1 oplus a_2 oplus a_3 oplus a_4 oplus 0 = 0 oplus 1 oplus 0 oplus 1 oplus 0 oplus 0 = 0:a_5' = a_1 oplus a_2 oplus a_3 oplus a_4 oplus a_5 oplus 1 = 1 oplus 0 oplus 1 oplus 0 oplus 0 oplus 1 = 1:a_6' = a_2 oplus a_3 oplus a_4 oplus a_5 oplus a_6 oplus 1 = 0 oplus 1 oplus 0 oplus 0 oplus 1 oplus 1 = 1:a_7' = a_3 oplus a_4 oplus a_5 oplus a_6 oplus a_7 oplus 0 = 1 oplus 0 oplus 0 oplus 1 oplus 1 oplus 0 = 1.

Thus, {"a"′} = "x"7 + "x"6 + "x"5 + "x"3 + "x"2 + 1 = {11101101} = {ED}

See also

*the transformation matrix for an affine transformation
*matrix representation of a translation
*affine geometry
*homothetic transformation
*similarity transformation
*linear (the second meaning is affine transformation in 1D)
*3D projection
*flat (geometry)

External links

* [http://homepages.inf.ed.ac.uk/rbf/HIPR2/affine.htm Geometric Operations: Affine Transform] , R. Fisher, S. Perkins, A. Walker and E. Wolfart.
*
* " [http://demonstrations.wolfram.com/AffineTransform/ Affine Transform] " by Bernard Vuilleumier, The Wolfram Demonstrations Project.
* [http://planetmath.org/encyclopedia/AffineTransformation.html Affine Transform on PlanetMath]


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Affine Transformation — Dieser Artikel oder Abschnitt bedarf einer Überarbeitung. Näheres ist auf der Diskussionsseite angegeben. Hilf mit, ihn zu verbessern, und entferne anschließend diese Markierung. Bei einer Koordinatentransformation werden Koordinaten von einem… …   Deutsch Wikipedia

  • affine transformation — noun (mathematics) a transformation that is a combination of single transformations such as translation or rotation or reflection on an axis • Topics: ↑mathematics, ↑math, ↑maths • Hypernyms: ↑transformation …   Useful english dictionary

  • affine transformation — noun a linear transformation between vector spaces followed by a translation …   Wiktionary

  • Affine transformation — …   Википедия

  • Affine shape adaptation — is a methodology for iteratively adapting the shape of the smoothing kernels in an affine group of smoothing kernels to the local image structure in neighbourhood region of a specific image point. Equivalently, affine shape adaptation can be… …   Wikipedia

  • affine — [ afin ] adj. • XXe; fém. de affin 1 ♦ Biol. Formes affines, présentant des ressemblances ne traduisant pas toujours des liens de parenté. Les sélaginelles sont affines aux lycopodes. 2 ♦ Math. Transformation affine : transformation dans le plan… …   Encyclopédie Universelle

  • Affine — may refer to:*Affine cipher, a special case of the more general substitution cipher *Affine combination, a certain kind of constrained linear combination *Affine connection, a connection on the tangent bundle of a differentiable manifold *Affine… …   Wikipedia

  • Transformation geometrique — Transformation géométrique Pour les articles homonymes, voir Transformation. On appelle transformation géométrique, toute bijection d une partie d un ensemble géométrique dans lui même. On peut tenter une ou des classifications de ces… …   Wikipédia en Français

  • Affine differential geometry — Affine differential geometry, as its name suggests, is a type of differential geometry. The basic difference between affine and Riemannian differential geometry is that in the affine case we introduce volume forms over a manifold instead of… …   Wikipedia

  • Affine Abbildung — In der Geometrie und in der Linearen Algebra, Teilgebieten der Mathematik, ist eine affine Abbildung (auch affine Transformation genannt, insbesondere bei einer bijektiven Abbildung) eine Abbildung zwischen zwei affinen Räumen, bei der… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”