Generalised cost

Generalised cost

In transport economics, the generalised cost is the sum of the monetary and non-monetary costs of a journey.

Monetary (or "out-of-pocket") costs might include a fare on a public transport journey, or the costs of fuel, wear and tear and any parking charge, toll or congestion charge on a car journey.

Non-monetary costs refer to the time spent undertaking the journey. Time is converted to a money value using a value of time figure, which usually varies according to the traveller's income and the purpose of the trip.

The generalised cost is equivalent to the price of the good in supply and demand theory, and so demand for journeys can be related to the generalised cost of those journeys using the price elasticity of demand. Supply is equivalent to capacity (and, for roads, road quality) on the network

Basic form

In a basic form, the generalised cost (g) is composed of the following:

g=p+u(w)

* "p" refers to the monetary (out-of-pocket) costs of the journey.
* "u(w)" refers to the non-monetary (time) costs of an uncongested journey. This is a function of "w" (in the transport economic model, "w" is a measure of road standard or public transport service level, both of which are related to capacity). When the free-flow journey time is known, "u(w)" can be calculated as the product of the journey time ("t") in uncongested conditions and the opportunity cost of the traveller's time ("τ"), so that u(w) = au t.

Congestible networks

In a congestible system, every traveller imposes a small delay on every other traveller, increasing the journey time for all travellers. The generalised cost function can be expanded to reflect this "congestion delay".

g=p+u(w)+v(q,w)

The additional term "v(q,w)" refers to the opportunity cost of the additional journey time a traveller experiences because of congestion. In transport economic models, the parameter "q" is the demand and "w" is a measure of capacity (which is relevant when considering possible capacity expansion).

For example, if the travel time on a particular stretch of road increases by 10 minutes for every 1000 vehicles per hour that use the road, if "q" were measured in thousands of vehicles per hour, we would consider the congestion function to be v = 2q.

Weighting different types of time

It has been observed that travellers prefer time spent on some parts of their journey over time spent on others. A typical journey can be divided into four parts:
* Walk from the origin
* Wait for the vehicle
* Ride in the vehicle
* Walk to the destination

(All of these apply to public transport journeys; the wait for the vehicle does not generally apply to car or bicycle journeys, and for walk-only journeys, there is no division into parts.)

Typically, although travellers "dislike" all time spent travelling, they dislike walking and waiting parts of the journey more than in-vehicle journey time, and thus would be willing to pay more to avoid them. This results in a higher value of time for those parts of the journey than the main in-vehicle part of the journey. The function "u(w)" mentioned earlier can therefore be considered to comprise of differing sets of valued time.

An alternative approach to applying different values of time to each part of the journey is to apply a weighting to time spent on each different part of the journey which quantifies the level of dislike a traveller has for time spent on that bit of the journey relative to time spent in-vehicle. For example, if a traveller considers 12 minutes' walk to be "as bad" as 10 minutes in a vehicle, then each minute of walking time is equivalent to 1.2 minutes of in-vehicle time. In this manner, all parts of the journey can be converted into their equivalent in-vehicle time.

Once the equivalent in-vehicle time for the whole journey is calculated, this can be converted to a monetary value as described earlier.

Generalised time

If the monetary cost of the journey ("p") is considered to be irrelevant for the purposes of the exercise (for example, when comparing different journey options through a public transport network when fares are constant), there is no need to convert the generalised cost to a currency value - instead, it can be left in units of time, as long as all time is equivalent (for example, if all time is converted to in-vehicle time). These units of time may be referred to as generalised time.

Examples

Generalised cost of car journeys (uncongested)

A shopper decides to make a night-time visit to the 24-hour supermarket, which is 8km away. His car uses petrol such that the cost of the petrol is £0.10/km. The journey takes 12 minutes, and the shopper has a value of time of £4.50/hour.

In this case, "p" = £0.80, "t" = 0.2hrs and "τ" = £4.50/hr, so "u" = £0.90 and therefore "g" = £0.80 + £0.90 = £1.70.

Generalised cost of car journeys (with congestion)

A commuter drives to work 50km along a busy motorway, which includes a bridge with a toll of £2. She has a value of time of £12/hr and spends £0.15/km on fuel. The journey time is 40 minutes when few other cars are around, but it increases by 3 minutes for every 1000 vehicles on the motorway. At the time she travels, the motorway carries 10,000 vehicles per hour.

Here the monetary cost includes both fuel and a fixed toll, so "p" = £2 + (£0.15/km × 50km) = £9.50. The uncongested journey time is 40 minutes, so as she values time ("τ") at £12/hr, "u" = £8. The additional journey time (in hours) due to congestion (can be calculated as 0.05q where at this time of day, "q" = 10, so the journey is 30 minutes longer because of congestion delays. This makes "v" = £6.

Therefore the generalised cost of the journey is £9.50 + £8 + £6 = £23.50.

NB: the function "v(q)" is usually rather more complicated than suggested here, because the relationship between journey time and congestion is rarely linear! (see traffic engineering (transportation))

Generalised cost of public transport journeys

A teacher uses the Tube as the main part of his journey from home to his school. There are two ways he could get there:
* Walk to a nearby Tube station (5 minutes away) which has trains every 8 minutes to the station closest to the school (4 minutes' walk away) and which take 20 minutes to reach that station.
* Walk to a farther Tube station (10 minutes away) which has a better service (every 3 minutes) but runs to a station further away from the school (7 minutes' walk), taking 15 minutes to reach that station.

The fares are the same on both routes, and the teacher dislikes waiting time 1.2 times more than in-vehicle time (IVT), and dislikes walking time 1.5 times more than IVT.

We can calculate which route is preferable by comparing generalised time (measured in terms of IVT) for each.

For the first route, waiting time is, on average, 4 minutes, and total walking time is 9 minutes. Therefore the total generalised time for this route is 4×1.2 + 9×1.5 + 20 = 38.3 minutes.

For the second route, waiting time is an average of 1.5 minutes, and total walking time is 17 minutes. Generalised time is 1.5×1.2 + 17×1.5 + 15 = 42.3 minutes.

Therefore the teacher should choose the first route, even though the frequency of service is lower and the journey time is longer.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Induced demand — is the phenomenon that after supply increases, more of a good is consumed. This is entirely consistent with the economic theory of supply and demand; however, this idea has become important in the debate over the expansion of transportation… …   Wikipedia

  • Value of time — In transport economics, the value of time is the opportunity cost of the time that a traveller spends on their journey. In essence, this makes it the amount that a traveller would be willing to pay in order to save time, or the amount they would… …   Wikipedia

  • Transport economics — is a branch of economics that deals with the allocation of resources within the transport sector and has strong linkages with civil engineering. Transport economics differs from some other branches of economics in that the assumption of a… …   Wikipedia

  • Highway — For other uses, see Highway (disambiguation). A German Autobahn in Lehrte …   Wikipedia

  • List of mathematics articles (G) — NOTOC G G₂ G delta space G networks Gδ set G structure G test G127 G2 manifold G2 structure Gabor atom Gabor filter Gabor transform Gabor Wigner transform Gabow s algorithm Gabriel graph Gabriel s Horn Gain graph Gain group Galerkin method… …   Wikipedia

  • Benzodiazepine — Benzodiazepines …   Wikipedia

  • Common Agricultural Policy — European Union This article is part of the series: Politics and government of the European Union …   Wikipedia

  • Relocation services — or employee relocation includes a range of internal business processes that are engaged to transfer employees, their families, and/or entire departments of a business to a new work location. Like other types of employee benefits, these processes… …   Wikipedia

  • Production–possibility frontier — In economics, a production–possibility frontier (PPF), sometimes called a production–possibility curve or product transformation curve, is a graph that compares the production rates of two commodities that use the same fixed total of the factors… …   Wikipedia

  • Electrical impedance — Electromagnetism Electricity · …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”