Heap leaching

Heap leaching

Heap leaching is an industrial mining process to extract precious metals and copper compounds from ore.

Process

The mined ore is crushed into small chunks and heaped on an impermeable plastic and/or clay lined leach pad where it can be irrigated with a leach solution to dissolve the valuable metals. Either sprinklers, or often drip irrigation, is used to minimize evaporation. The solution then percolates through the heap and leaches out the precious metal. This can take several weeks. The leach solution containing the dissolved metals is then collected.

Precious metals method

The crushed ore is irrigated with a dilute cyanide solution. The solution percolates through the heap and leaches out the precious metal. This can take several weeks.

The solution containing the precious metals ("pregnant solution") continues percolating through the crushed ore until it reaches the liner at the bottom of the heap where it drains into a storage (pregnant solution) pond. After separating the precious metals from the pregnant solution, the dilute cyanide solution (now called "barren solution") is normally re-used in the heap-leach-process or occasionally sent to an industrial water treatment facility where the residual cyanide is treated and residual metals are removed. The water is then discharged to the environment, posing possible water pollution.Fact|date=March 2008

During the extraction phase, the gold ions form complex ions with the cyanide: Au^+ (s) + 2CN^- (aq) ightarrow Au(CN)_2^- (aq)

Recuperation of the gold is readily achieved with a redox-reaction:

2 Au(CN)_2^- (aq) + Zn (s) ightarrow Zn(CN)_4^- (aq) + 2 Au (s)

Copper method

The method is similar to the cyanide method, above, except sulfuric acid is used to dissolve copper from its ores. The acid is recycled from the solvent extraction circuit (see solvent extraction-electrowinning, SX/EW) and reused on the leach pad. A byproduct is iron(II) sulfate, jarosite, which is produced as a byproduct of leaching pyrite, and sometimes even the same sulfuric acid that is needed for the process.

Although the heap leaching is a low cost-process, it normally has recovery rates of 60-70%, although there are exceptions. It is normally most profitable with low-grade ores. Higher-grade ores are usually put through more complex milling processes where higher recoveries justify the extra cost. The process chosen depends on the properties of the ore.

ulfuric acid heap leaching of nickel

The method is an acid heap leaching method like that of the copper method in that it utilises sulfuric acid instead of cyanide solution to dissolve the target minerals from crushed ore. The method has been developed by European Nickel PLC for the rock laterite deposits of Turkey and the Balkans.

ee also

* Gold cyanidation
* Gold extraction
* Tailings
* Mineral processing

External links

* [http://www.rpi.edu/dept/chem-eng/Biotech-Environ/LEACH/heap.htm Heap leaching into groundwater is a major health concern] from Rensselaer Polytechnic Institute school of engineering
* [http://www.enickel.co.uk/__data/assets/pdf_file/7256/en_aim_prospectus_310304.pdf European Nickel PLC official website]
* [http://minerals.usgs.gov/minerals/pubs/commodity/nickel/myb-2005-nicke.pdf USGS 2005 Minerals Yearbook - Nickel]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • heap leaching — Смотри кучное выщелачивание …   Энциклопедический словарь по металлургии

  • heap leaching — noun : a mining process in which metals are leached from a pile of crushed ore by a percolating solution (as of sodium cyanide) …   Useful english dictionary

  • Leaching (metallurgy) — Leaching is a widely used extractive metallurgy technique which converts metals into soluble salts in aqueous media. Compared to pyrometallurgical operations, leaching is easier to perform and much less harmful, because no gaseous pollution… …   Wikipedia

  • Leaching — In general, leaching is the extraction of certain materials from a carrier into a liquid (usually, but not always a solvent). Specifically, it may refer to:*Leaching (agriculture) *Leaching (chemical science) *Leaching (metallurgy) **Dump… …   Wikipedia

  • Dump leaching — is an industrial process to extract precious metals and copper from ores.[1] Dump leaching is similar to heap leaching, however in the case of dump leaching ore is taken directly from the mine and stacked on the leach pad without crushing where,… …   Wikipedia

  • кучное выщелачивание — [heap leaching] выщелачивание ценных компонентов из отвальных, забалансовых и потерянных руд, проводимое на открытых, специально оборудованных площадках; отличается высокой производительностью и низкой себестоимостью продуктов. В промышленной… …   Энциклопедический словарь по металлургии

  • Hydrometallurgy — is part of the field of extractive metallurgy involving the use of aqueous chemistry for the recovery of metals from ores, concentrates, and recycled or residual materials. Hydrometallurgy is typically divided into three general areas: *Leaching… …   Wikipedia

  • Uranium mining — The Ranger Uranium Mine in Australia …   Wikipedia

  • Gold extraction — or recovery from its ores may require a combination of comminution, mineral processing, hydrometallurgical, and pyrometallurgical processes to be performed on the ore. [cite web url=http://geology.com/publications/getting gold/gold… …   Wikipedia

  • Copper extraction techniques — This article is about historical production methods. For modern methods, see Flash smelting. The Chino open pit copper mine in New Mexico …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”